—原创译文，原文来自FB上一朋友，转载请注明
上一讲我们的手工梦幻钥匙做到了文字部分，接下来：
把剪好的文字黏到板子上，板子是干的哦。
Add your letters to your wooden sign.
下一步之前，提前在木板上穿两个洞洞用来穿彩带之类的，当作提手。当然了，在木板的后面打的结尽量小一些。
Take some ribbon and put it through the holes on the sign, if you sign does not have pre-drilled holes you will have to measure and drill, tie a good knot of the backside of each hole so the ribbon stays.
取另外一条彩带，绑到做好的毛毡钥匙上，效果如下图。
Take another piece of ribbon and pull it through the hole in your key. Tie another knot at the end.
把小木板翻过来，正面朝向自己，让后在底部的中间位置钉一枚小钉子，挂起来（粘起来），嘻嘻！我们的梦幻钥匙门牌做好了哦 ^。^~
Flip sign over and place the knot from the key on the bottom/middle of the sign. Use your small nail (Or use some heavy duty glue) to secure the ribbon to the wood.
完成！！！
有问题请跟楼哦，随时欢迎 ^。^~ 如果你做好了一个，记得让大家瞅瞅哦~
All done!!!
And there you have any questions please feel free to ask. And as always, if you make one, share your work with us!
